TNS-01043: Password changed for string

TNS-01043: Password changed for string

Cause: Control program status message.

Action: None.

TNS-01042: Current Listener is string

TNS-01042: Current Listener is string

Cause: Control program status message.

Action: None.

TNS-01041: %s parameter string set to string

TNS-01041: %s parameter string set to string

Cause: Control program status message.

Action: None.

TNS-01040: SNMP string

TNS-01040: SNMP string

Cause: Control program status message.

Action: None.

TNS-01039: %s has string service handler(s)

TNS-01039: %s has string service handler(s)

Cause: Control program status message.

Action: None.

TNS-01038: %s established:string refused:string current:string max:string state:string

TNS-01038: %s established:string refused:string current:string max:string state:string

Cause: Control program status message.

Action: None.

TNS-01037: string established:string refused:string

TNS-01037: string established:string refused:string

Cause: Control program status message.

Action: None.

TNS-01036: %s established:string refused:string

TNS-01036: %s established:string refused:string

Cause: Control program status message.

Action: None.

TNS-01034: Uptime number days number hr. number min. number sec

TNS-01034: Uptime number days number hr. number min. number sec

Cause: Control program status message.

Action: None.

TNS-01033: Listener Parameter File string

TNS-01033: Listener Parameter File string

Cause: Control program status message.

Action: None.

TNS-01030: The listener supports no services

TNS-01030: The listener supports no services

Cause: Control program status message.

Action: None.

TNS-01029: Services Summary...

TNS-01029: Services Summary...

Cause: Control program status message.

Action: None.

TNS-01028: Listener Log File string

TNS-01028: Listener Log File string

Cause: Control program status message.

Action: None.

TNS-01027: Listener Trace File string

TNS-01027: Listener Trace File string

Cause: Control program status message.

Action: None.

TNS-00095: * to trace_on - argument is considered the trace level

TNS-00095: * to trace_on - argument is considered the trace level

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00094: * to status - argument is considered the remote process_name

TNS-00094: * to status - argument is considered the remote process_name

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00093: argument is only supplied to either status or trace_on

TNS-00093: argument is only supplied to either status or trace_on

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00092: * CMANAGER (or intlsnr) - will ask the Cmanager only

TNS-00092: * CMANAGER (or intlsnr) - will ask the Cmanager only

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00091: * Navigator (or navgatr) - will ask the Navigator only

TNS-00091: * Navigator (or navgatr) - will ask the Navigator only

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00090: * Interchange - will ask the Interchange

TNS-00090: * Interchange - will ask the Interchange

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00089: process_name is one of Interchange, CMANAGER, or Navigator

TNS-00089: process_name is one of Interchange, CMANAGER, or Navigator

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00088: * exit - quit the Interchange controller

TNS-00088: * exit - quit the Interchange controller

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00087: * version - ask the process name to display its version number

TNS-00087: * version - ask the process name to display its version number

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00086: * reload - ask the Navigator to reload TNSNET.ORA

TNS-00086: * reload - ask the Navigator to reload TNSNET.ORA

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00085: * reread - ask the process name to reread parameter files

TNS-00085: * reread - ask the process name to reread parameter files

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00084: * trace_off - ask process name to turn tracing off

TNS-00084: * trace_off - ask process name to turn tracing off

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00083: (USER or ADMIN) in the argument field

TNS-00083: (USER or ADMIN) in the argument field

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00082: NOTE: the user MUST specify a trace level

TNS-00082: NOTE: the user MUST specify a trace level

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00081: * trace_on - ask process name to turn tracing on

TNS-00081: * trace_on - ask process name to turn tracing on

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00080: * force_log - ask process_name to dump its state

TNS-00080: * force_log - ask process_name to dump its state

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00079: * log_off - ask process_name to turn logging off

TNS-00079: * log_off - ask process_name to turn logging off

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00078: * log_on - ask process_name to turn logging on

TNS-00078: * log_on - ask process_name to turn logging on

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00077: the argument field

TNS-00077: the argument field

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00076: component by specifying the component name in

TNS-00076: component by specifying the component name in

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00075: NOTE: the user may get the status info of a remote

TNS-00075: NOTE: the user may get the status info of a remote

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00074: * status - get statistics from the process_name

TNS-00074: * status - get statistics from the process_name

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00073: * stop or abort - stop the process_name

TNS-00073: * stop or abort - stop the process_name

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00072: * start - start up process_name

TNS-00072: * start - start up process_name

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00071: where lamp;lt;lamp;nbsp;commandlamp;gt; is one of following:

TNS-00071: where lamp;lt;lamp;nbsp;commandlamp;gt; is one of following:

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00070: INTCTL usage: (intctl( lamp;lt;lamp;nbsp;commandlamp;gt; lamp;lt;lamp;nbsp;process_namelamp;gt; (argument(

TNS-00070: INTCTL usage: (intctl( lamp;lt;lamp;nbsp;commandlamp;gt; lamp;lt;lamp;nbsp;process_namelamp;gt; (argument(

Cause: Help message displayed by INTCTL.

Action: None.

TNS-00065: INTCTL: Command cannot be executed remotely

TNS-00065: INTCTL: Command cannot be executed remotely

Cause: A command other than status and version has been attempted remotely.

Action: If you desire execute any command other than status and version, you must run intctl on the interchange machine.

TNS-00064: INTCTL: Failed to find CMANAGER_NAME in INTCHG.ORA

TNS-00064: INTCTL: Failed to find CMANAGER_NAME in INTCHG.ORA

Cause: INTCTL was unable to find the CMANAGER_NAME parameter in INTCHG.ORA.

Action: Check that the INTCHG.ORA file is properly constructed.

TNS-00063: INTCTL: Failed to allocate memory for buffers

TNS-00063: INTCTL: Failed to allocate memory for buffers

Cause: INTCTL was unable to allocate memory for internal buffers.

Action: Check the amount of available memory on your machine to ensure that there is enough memory to run this executable. If necessary, free up memory by running fewer programs, then try again.

TNS-00062: INTCTL: Bad command or syntax error: For help type help or h or ?

TNS-00062: INTCTL: Bad command or syntax error: For help type help or h or ?

Cause: The user entered an invalid command.

Action: Check the MultiProtocol Interchange Administrator s Guide or type HELP for a list of valid commands.

TNS-00061: INTCTL: Bad command or syntax error: You must specify a trace level

TNS-00061: INTCTL: Bad command or syntax error: You must specify a trace level

Cause: The user did not specify a trace level.

Action: Specify a trace level and retry command.

TNS-00060: INTCTL: Bad command: only the STATUS command can be used on remote Interchanges

TNS-00060: INTCTL: Bad command: only the STATUS command can be used on remote Interchanges

Cause: The user entered a command that does not exist, or the user tried to make a request other than STATUS to a remote Interchange.

Action: Check the MultiProtocol Interchange Administrator s Guide for a list of INTCTL commands or type HELP for a list of valid commands.

TNS-00046: INTCTL: Could not contact the CMANAGER on address

TNS-00046: INTCTL: Could not contact the CMANAGER on address

Cause: There was an attempt to contact a CMANAGER on a specific address which is not responding.

Action: Verify that the TNSNET.ORA file contains that address. Also check that the CMANAGER is actually listening on that address by using the INTCTL STATUS command. If necessary, start the Connection Manager using the INTCTL START command.

TNS-00045: INTCTL: Could not contact the Navigator on address

TNS-00045: INTCTL: Could not contact the Navigator on address

Cause: There was an attempt to contact a Navigator on a specific address which is not responding.

Action: Check the TNSNAV.ORA file for that address. Or check that the Navigator is actually listening on that address.

TNS-00044: INTCTL: You must have an INTCHG.ORA file to contact the Connection Manager

TNS-00044: INTCTL: You must have an INTCHG.ORA file to contact the Connection Manager

Cause: There was an attempt to contact a default Connection Manager (Interchange) where there was no INTCHG.ORA present in the correct directory.

Action: Create an INTCHG.ORA file. Make sure it is placed in the correct directory and includes the correct name for the Connection Manager you wish to contact.

TNS-00043: The CMANAGER has active connections, do you still want to stop it (y or n)?

TNS-00043: The CMANAGER has active connections, do you still want to stop it (y or n)?

Cause: The CMANAGER that is being stopped has active connections going through. This is the confirmation message.

Action: Respond by pressing y or n. Answering y will cause the active database connection to be dropped; this is not generally recommended.

TNS-00042: INTCTL: CMANAGER already running. Start operation cancelled

TNS-00042: INTCTL: CMANAGER already running. Start operation cancelled

Cause: There is a Connection Manager already running and listening on the same addresses.

Action: None; the Connection Manager is already running.

TNS-00041: INTCTL: Navigator already running. Start operation cancelled

TNS-00041: INTCTL: Navigator already running. Start operation cancelled

Cause: There is a Navigator already running and listening on the same addresses.

Action: None; the Navigator is already running.

TNS-00040: INTCTL: failed to initialize trace context- Continuing anyway

TNS-00040: INTCTL: failed to initialize trace context- Continuing anyway

Cause: Problem while opening specified trace file because of errors in INTCHG.ORA or because the user has incorrect privileges, or the file does not exist.

Action: Check the privileges on the configuration files and ensure that all of them exist in their proper locations.

AMD-00141: parameter string of string not valid starting around string

AMD-00141: parameter string of string not valid starting around string

Cause: A parameter was found to be invalid.

Action: Ensure that the parameter is correctly formed and valid.

AMD-00140: internal error: (string( (string( (string( (string( (string(

AMD-00140: internal error: (string( (string( (string( (string( (string(

Cause: This is an internal error.

Action: Contact Oracle Support Services.

AMD-00139: level names parameter not valid

AMD-00139: level names parameter not valid

Cause: The number of names in the LEVELS_LIST parameter did not equal the number specified by the LEVELS parameter.

Action: Ensure that the LEVELS_LIST parameter is correctly formed and that it holds the number of names specified by the LEVELS parameter.

AMD-00138: level names parameter not null or defaulted

AMD-00138: level names parameter not null or defaulted

Cause: Level names were provided to the LEVELS_LIST parameter, but the LEVELS parameter did not specify the number of levels.

Action: Either set the LEVELS_LIST parameter to null (the default) or set the LEVELS parameter to the number of levels.

AMD-00137: prefix string exceeds maximum permitted length of string characters

AMD-00137: prefix string exceeds maximum permitted length of string characters

Cause: A prefix supplied to an API call was too long.

Action: Change the prefix so that it is within the permitted length, then re-issue the API call.

AMD-00136: Generation of SQL script string failed

AMD-00136: Generation of SQL script string failed

Cause: There was a program error or a system resource limit was exceeded.

Action: Verify that sufficient system resources are available, then retry.

AMD-00135: measure #string: RDBMS measure column data type not specified

AMD-00135: measure #string: RDBMS measure column data type not specified

Cause: RDBMS measure column data type for this measure was not specified in either the input text file or the input string.

Action: Modify the input text file or the input string to include the missing RDBMS measure column data type.