NCR-01005: NCRS: Failed to flush the output buffer.

NCR-01005: NCRS: Failed to flush the output buffer.

Cause: Failed to write data in the output buffer to an output device.

Action: Check the output device driver return code for further information.

NCR-01004: NCRS: Write error.

NCR-01004: NCRS: Write error.

Cause: Failed to write data to an output device.

Action: Check the output device driver return code for further information.

NCR-01003: NCRS: Read error.

NCR-01003: NCRS: Read error.

Cause: Failed to read data from an input device.

Action: Check the input device driver return code for further information.

NCR-00003: NCR: Initialization failure

NCR-00003: NCR: Initialization failure

Cause: Usually insufficient swap space or system memory.

Action: Increase swap space or system memory.

NCR-00002: NCR: Invalid usage

NCR-00002: NCR: Invalid usage

Cause: Bad function parameter.

Action: Check function call.

NCR-00001: NCR: Could not allocate memory

NCR-00001: NCR: Could not allocate memory

Cause: Insufficient swap space or system memory.

Action: Increase swap space or system memory.

NMP-00011: internal SNMP program interface error

NMP-00011: internal SNMP program interface error

Cause: An internal error occurred inside the SNMP program interface. This error is usually displayed underneath an error which describes the problem in more detail.

Action: Not normally visible to the user. For further details, turn on tracing and re-execute the failing operation. If the error persists, contact Worldwide Customer Support.

NMP-00010: memory exhausted

NMP-00010: memory exhausted

Cause: The program interface has run out of memory.

Action: Add more memory or run fewer processes.

NMP-00009: SNMP initialization failure

NMP-00009: SNMP initialization failure

Cause: The SNMP program interface could not be initialized, either because its error message file could not be found, or because there is a malformed snmp.communities parameter value in the parameter table.

Action: Check that SQL*Net has been installed properly and that all message files are in their proper locations. Turn on tracing and look for parameter table load errors.

NMP-00008: SNMP message has incorrect version, version 0 is required

NMP-00008: SNMP message has incorrect version, version 0 is required

Cause: The SNMP program interface received a protocol request with an illegal version number. This error may occur if a standard SNMP network monitor is sending malformed requests to an Oracle service through an SNMP-to-TNS gateway.

Action: Ensure that the management platform in question is sending SNMP requests with the correct version number. If the error persists, and occurs when an Oracle control program sends requests to an Oracle service, contact Worldwide Customer Support.

NMP-00007: I or O failure

NMP-00007: I or O failure

Cause: The SNMP program interface attempted to send or receive an SNMP request and was unable to do so because of a network failure of some sort. This error is usually displayed underneath an error which describes the problem in more detail. The problem typically occurs when a control program is attempting to communicate with a service and either that service has unexpectedly terminated or the network path between the control program and the service has been interrupted.

Action: none

NMP-00006: uninitialized SNMP context

NMP-00006: uninitialized SNMP context

Cause: An internal function attempted to use an uninitialize SNMP handle.

Action: Not normally visible to the user. For further details, turn on tracing and re-execute the failing operation. If the error persists, contact Worldwide Customer Support.

NMP-00005: general SNMP error

NMP-00005: general SNMP error

Cause: an SNMP error occured which did not fall under the heading of any other more specific error condition. This error may occur if a standard SNMP network monitor is sending requests to an Oracle service through an SNMP-to-TNS gateway, and that service cannot understand the requests.

Action: Not normally visible to the user. For further details, turn on tracing and re-execute the failing operation. If the error persists, and occurs when an Oracle control program sends requests to an Oracle service, contact Worldwide Customer Support.

NMP-00004: SNMP variable is read only

NMP-00004: SNMP variable is read only

Cause: The user attempted to change a variable value at a remote server, and that variable is read-only. This error is usually displayed underneath an error which describes the problem in more detail.

Action: Read-only variables may never be modified.

NMP-00003: bad SNMP variable value

NMP-00003: bad SNMP variable value

Cause: The SNMP program interface received a variable value which has an unsupported data type. This error may occur if a standard SNMP network monitor is sending requests to an Oracle service through an SNMP-to-TNS gateway, and that service cannot understand the requests.

Action: Not normally visible to the user. For further details, turn on tracing and re-execute the failing operation. If the error persists, and occurs when an Oracle control program sends requests to an Oracle service, contact Worldwide Customer Support.

NMP-00002: no such SNMP variable name

NMP-00002: no such SNMP variable name

Cause: An SNMP request was not processed because the one or more of the variable names in the request does not exist. This error is not normally visible to the user except in a trace file, where it is usually part of a soft error condition which is normal.

Action: The error may indicate that a managed server does not support an operation requested by its control program, perhaps because of version incompatibility. For further details, turn on tracing and re-execute the failing operation. If the error persists, and does not occur as part of a soft error condition as noted in the trace file, contact Worldwide Customer Support.

NMP-00001: value too big

NMP-00001: value too big

Cause: The SNMP program interface received a value too large for it to process. This error is usually displayed underneath an error which describes in more detail the value which caused the problem.

Action: Not normally visible to the user. For further details, turn on tracing and re-execute the failing operation. If the error persists, contact Worldwide Customer Support.

NNF-04009: Usage: tns2nis lamp;lt;lamp;nbsp;filenamelamp;gt;

NNF-04009: Usage: tns2nis lamp;lt;lamp;nbsp;filenamelamp;gt;

Cause: The conversion tool was not invoked properly. The filename should either be tnsnames.ora or native.ora

Action: Restart the conversion tool with the proper parameter.

NNF-04008: Error writing outputfile

NNF-04008: Error writing outputfile

Cause: An error occured while writing to the output file.

Action: Check available disk space. If the error persists, contact Worldwide Customer Support.

NNF-04007: Error reading input file

NNF-04007: Error reading input file

Cause: A problem while reading the input file. This could be caused by an unexpected end of file in the input file.

Action: Check that the file is intact and that the syntax of the input file is correct.

NNL-00405: Forwarding information:

NNL-00405: Forwarding information:

Cause: Control program general message.

Action: None.

NNL-00404: TTL: string

NNL-00404: TTL: string

Cause: Control program general message.

Action: None.

NNL-00403: Number of answers: number

NNL-00403: Number of answers: number

Cause: Control program general message.

Action: None.

NNL-00402: Authoritative server: string

NNL-00402: Authoritative server: string

Cause: Control program general message.

Action: None.

NNL-00401: Authoritative answer: string

NNL-00401: Authoritative answer: string

Cause: Control program general message.

Action: None.

NNL-00400: Response status:

NNL-00400: Response status:

Cause: Control program general message.

Action: None.

NNL-00353: Not allowed

NNL-00353: Not allowed

Cause: Control program general message.

Action: None.

NNL-00352: Cancelled save config

NNL-00352: Cancelled save config

Cause: Control program general message.

Action: None.

NNL-00351: Scheduled configuration save to occur in string

NNL-00351: Scheduled configuration save to occur in string

Cause: Control program general message.

Action: None.

NNL-00350: No save config currently scheduled

NNL-00350: No save config currently scheduled

Cause: Control program general message.

Action: None.

NNL-00349: Configuration will be saved in string

NNL-00349: Configuration will be saved in string

Cause: Control program general message.

Action: None.

NNL-00348: Server saving the config file now

NNL-00348: Server saving the config file now

Cause: Control program general message.

Action: None.

NNL-00347: Save_config_on_stop is now OFF

NNL-00347: Save_config_on_stop is now OFF

Cause: Control program general message.

Action: None.

NNL-00346: Save_config_on_stop is now ON

NNL-00346: Save_config_on_stop is now ON

Cause: Control program general message.

Action: None.

NNL-00345: Save_config_on_stop is currently OFF

NNL-00345: Save_config_on_stop is currently OFF

Cause: Control program general message.

Action: None.

NNL-00344: Save_config_on_stop is currently ON

NNL-00344: Save_config_on_stop is currently ON

Cause: Control program general message.

Action: None.

NNL-00343: Log file name is now string

NNL-00343: Log file name is now string

Cause: Control program general message.

Action: None.

NNL-00342: Log file name is currently string

NNL-00342: Log file name is currently string

Cause: Control program general message.

Action: None.

NNL-00341: Trace file name is now string

NNL-00341: Trace file name is now string

Cause: Control program general message.

Action: None.

NNL-00340: Trace file name is currently string

NNL-00340: Trace file name is currently string

Cause: Control program general message.

Action: None.

NNL-00308: Server dumping its cache to the trace file

NNL-00308: Server dumping its cache to the trace file

Cause: Control program general message.

Action: None.

NNL-00307: Server checkpointing its cache

NNL-00307: Server checkpointing its cache

Cause: Control program general message.

Action: None.

NNL-00306: Server setting all statistic counters to zero

NNL-00306: Server setting all statistic counters to zero

Cause: Control program general message.

Action: None.

NNL-00305: Server dumping statistics to the log file

NNL-00305: Server dumping statistics to the log file

Cause: Control program general message.

Action: None.

NNL-00304: Server flushing its cache

NNL-00304: Server flushing its cache

Cause: Control program general message.

Action: None.

NNL-00303: Server checking for reload

NNL-00303: Server checking for reload

Cause: Control program general message.

Action: None.

NNL-00302: Server restarting

NNL-00302: Server restarting

Cause: Control program general message.

Action: None.

NNL-00301: Server shutting down

NNL-00301: Server shutting down

Cause: Control program general message.

Action: None.

NNL-00300: Cancelled server cache dump

NNL-00300: Cancelled server cache dump

Cause: Control program general message.

Action: None.

NNL-00299: Scheduled server cache dump to occur in string

NNL-00299: Scheduled server cache dump to occur in string

Cause: Control program general message.

Action: None.

NNL-00298: No cache dump currently scheduled

NNL-00298: No cache dump currently scheduled

Cause: Control program general message.

Action: None.

NNL-00297: Cache will be dumped to trace file in string

NNL-00297: Cache will be dumped to trace file in string

Cause: Control program general message.

Action: None.

NNL-00296: Controller s local trace level changed from number to number

NNL-00296: Controller s local trace level changed from number to number

Cause: Control program general message.

Action: None.

NNL-00295: Controller s local trace level is currently number

NNL-00295: Controller s local trace level is currently number

Cause: Control program general message.

Action: None.

NNL-00294: No entries found

NNL-00294: No entries found

Cause: Control program general message.

Action: None.

NNL-00293: Controller s trace level remains unchanged

NNL-00293: Controller s trace level remains unchanged

Cause: Control program general message.

Action: None.

NNL-00292: Scheduled statistic counters to be reset in string

NNL-00292: Scheduled statistic counters to be reset in string

Cause: Control program general message.

Action: None.

NNL-00291: Statistic counters are next reset in string

NNL-00291: Statistic counters are next reset in string

Cause: Control program general message.

Action: None.

NNL-00290: Cancelled cache flush

NNL-00290: Cancelled cache flush

Cause: Control program general message.

Action: None.

NNL-00289: Scheduled cache flush to occur in string

NNL-00289: Scheduled cache flush to occur in string

Cause: Control program general message.

Action: None.